A good friend of mine gave me this patio set to bring back to life for her. The table and chairs were wobbly, and everything needed much sanding and repair. I took apart everything I could, and sanded it right down. With a fresh coat of stain, it will look amazing. I think she’ll be pleased with the end result.
I refurbished this patio set made of Eucalyptus. I took it all apart and sanded it. I then stained it with two coats of C2 Guard for Wood - Sugar Honey from Randall Paints.
A friend of mine wanted to refinish her outdoor dining set. Both the table and chairs were sanded. It was refinished with one coat of a mix of one part stain, and two part Clear Finish.
 |
| Original |
 |
| End Result |
I made this folding Adirondack chair in 2021, but never stained, or painted it. It’s made of Pine. I took it apart and sanded it down. I stained it with two coats of C2 Guard for Wood - Sugar Maple from Randall Paints.
The Harvest dining table I built in 2014 was in need of some TLC. After being stored for three years, it was time to uncover it from the tarp it was wrapped up in! The stain was in rough condition, and I didn't like the semi-transparent walnut-brown stain anymore, so I stripped it right down. I then took it apart, piece by piece, sanded it, and stained it with two coats of C2 Guard for Wood - Sugar Honey from Randall Paints.
A dear friend of mine had an aging bench which needed some refinishing. I took it apart and sanded it completely. I finished it with three coats of C2 Guard for Wood - Tupelo Honey stain, from Randall Paints.
